Showing posts with label Clothes. Show all posts
Showing posts with label Clothes. Show all posts

Tuesday, November 8, 2011

Why is the Clothes Dryer Destroying My Clothes?

!±8± Why is the Clothes Dryer Destroying My Clothes?

It happened again, your clothes were ruined by the dryer! Burn holes in your underwear and your other articles of clothing, torn and shredded. What is going on? You dryer might need some fixin' and here's what you will need to replace.

If your clothes are getting ripped, cut or torn, your dryer probably has a felt-like seal at the front and/or rear of the dryer drum that has worn out, is torn or is missing. Your clothes might be getting caught in the gap between the clothes drum and the front or rear of the dryer interior. When a clothes dryer seal wears out, you need to replace it.

Also, check the lint filter or lint trap; it might be worn or showing sharp edges. Your clothes could possible be getting caught on this during the cycle. Be sure to replace this part immediately.

If your clothing comes out marked up, the support parts for the dryer drum might be worn out, thus, throwing the drum off-balances and getting your clothes pinched in between parts of the dryer. Check the glides, rollers, wheels, and seals for wear. Replace the whole set of glides, rollers, or wheels if one or more are bad. You will also want to check the rear support for any play in it. Sometimes the rear drum bearing gets worn out.

If your laundry is coming out smelling smoky, your dryer may have had a small lint fire inside the cabinet, leaving a smoky odor in the clothes drum and on your clothes. Even though there is a lint filter in your dryer, it doesn't catch all the lint. You need to check inside the cabinet at least yearly to look for and clean out any lint build-up. Check the inside cabinet and inner ductwork of your dryer. A dryer vent lint brush will help you reach inside the machine and vent to brush off and remove any built up lint. Also, be sure to clean out the lint trap after every use.

A lint fire is nothing to take lightly; many house fires are caused by lint build up in dryers and their vents. According to this 2005 article from CBS News, 15,000 house fires are caused by dryers every year. Keep your family safe by checking for lint buildup in the cabinet at least yearly. Be sure to check your outside exhaust vent for blockages. Install a smoke alarm near your dryer for added protection. Have a professional appliance repair person check the dryer for damage caused by any lint fires and to cleanout any lint from any pipes connected to the dryer.

Also, don't put items in the dryer such as garage rags stained with motor oil or gasoline, and aprons, dish towels, or napkins stained with cooking oil. Even if the items was washed previously, some residue might still remain and possible cause a combustion.

Other items that aren't meant for the dryer: anything made of rubber or plastic, such as baby diaper pants, bath mats, even foam-padded bras (bras and other delicates should be air-dried anyways to prevent them from bending and losing their shape!)

A signal that your dryer might be becoming clogged with lint, your clothes just aren't coming out dry. Clean your dryer with a link brush or call a professional to have it cleaned for you. You might not need a new dryer, just have it cleaned.

If your clothes are coming out all wrinkled, do not let your clothes sit in the dryer after the cycle has ended - remove the clothes promptly from the dryer and either hang or fold them. Also, dry only one load at a time; don't pack the dryer too full. Do not dry heavy items with light items. Use the permanent press cycle to give clothes a cool down cycle at the end to reduce wrinkling.

Make sure you are also washing the clothes in the correct temperature (water that is too hot can also cause clothes to wrinkle). Be sure to read and follow the care instructions on the clothing item's label for best results.

Finally, if it's a little wrinkled, you can always rewash and dry the clothes again.


Why is the Clothes Dryer Destroying My Clothes?

Cheap Watt Meters Medela Breast Pump Advanced Fast New Braun Shaver Spare Parts

Wednesday, October 12, 2011

Inferior Clothes Dryer Vent Installation

!±8± Inferior Clothes Dryer Vent Installation

You've paid the builder big bucks to design your dream home so imagine your surprise when months later you discover a huge collection of lint in the attic because of an inferior clothes dryer vent installation.

First off let's get something straight. Many builders will defend their practices claiming they are perfectly acceptable. But by law depending on where you live this is not generally not considered a legal install.

Code states that the dryer exhaust must vent outside and installing the vent near an attic vent does not meet code requirements. Using a proper exhaust vent and everything is fine but venting into the attic itself is unacceptable and yet it occurs far too often.

The way a clothes dryer exhaust is installed can cause serious problems in your home. Mildew can grow and cause illness in just a short period of time. In fact the moist humid atmosphere is perfect for mildew conditions. But worse yet is the fire hazard. The lint is highly combustible and any heat source could be enough to start a fire.Dryer venting isn't quite as simple as many think it is. So let's unravel the mystery. As the dryer runs the blower motor pushes the moist air out but the problem is it can only push the air a limited distance.

If the run is too long the vent pipe itself will become clogged with lint and pose a fire hazard. The type of exhaust hood, the type of pipe, and even the number of bends affect how long the run can be.

The smooth metal pipe is much better than the plastic corrugated pipe that is so popular these days. It has the least resistance to air flow. If you use an exhaust hood you can make a run that's up to 64 feet. The openings should be at least 16 square inches.

Reducing the number of bends is also important. For example that 64 foot run reduces to 27 feet if there are four bends. If you use the flexible hose it reduces even more to 15 feet.

You can vent through the roof providing you use an adequate exhaust hood to draw out the hot air. A one piece hood that has a wide flange is the best choice especially on an asphalt roof. Do not vent through the soffits.

If you live in a cold climate you must make sure your builder properly insulates the venting pipe. If you do not the pipe will chill with the cold air and you'll get condensation which will run down the pipe, leak onto the joints and perhaps even pool under the dryer.

While you are checking you should also check that the pipe pieces are correctly joined using the correct joiners and that all seams have been taped to ensure that lint cannot build along the lip causing a potential fire hazard.

You've built the most beautiful house. You're proud of your accomplishment and you should be so don't settle for an inferior clothes dryer vent installation.


Inferior Clothes Dryer Vent Installation

!8!# Vizio Sound Bar Vsb200 Free Shipping Last Minute Rowing Machines










Sponsor Links